Pet-Immune Motion Sensor with PIR

The DSC PG9914 wireless PowerG motion detector is a wireless motion detector for use with any DSC system that uses PowerG wireless such as their Iotega and PowerSeries Neo alarm systems. It is a dual-purpose detector because it not only monitors for movement events but also features a built-in temperature sensor as well. The PG9914 can send the room temperature readout to the DSC NEO so that it reads out on a compatible keypad. 

The PG9914 features Fresnel and cylindrical lenses which provide superb motion detection and help cut down the instances of false alarms. The sensor will detect movement up to a 39' range if mounted in the optimum mounting position of between 7-8 ft. The PG9914 provides pet immunity for pets up to 85 lbs which means if a pet is 85 lbs or under; the detector will not activate if they move in front of it. This has LEDs built-in that will give you valuable feedback to help with installation. The LEDs will blink a certain color to let you know the strength of the communications between it and the main panel when you're placing the unit on the wall.

The sensor measures 3.27 x 2.4 x 1.66 in. It can be mounted and used in areas where the temperature range is between 14°F to 122°F. The PG9914 is powered by a 3V CR123A Lithium battery. These batteries will last 6-8 years before having to be replaced because of the battery saving technology built-in to each NEO PowerG wireless device. The motion has a wall and cover tamper to prevent would-be intruders from defeating the device by ripping it off of the wall.